How can I stop this background traffic sounds?

Another thing to try is put Blankets up on the walls that will also help deaden the noise by giving it less surfaces to bounce off of.. you would basically be creating a sound booth.
 
I never personally had luck with noise removal, it always makes my voice sound horrible. I would say to either try to move to the other side of your house for recording or do what JohnKen said, the try noise removal as a last resort :).
 
Noise removal is the wrong tool. It is only useful for ambient background noise, so unless the hum of traffic is constant, it won't help.

The fix will depend on your mic. Turn the input volume down and get the mic closer to your mouth. This should help dramatically.
 
Noise removal is the wrong tool. It is only useful for ambient background noise, so unless the hum of traffic is constant, it won't help.

The fix will depend on your mic. Turn the input volume down and get the mic closer to your mouth. This should help dramatically.
Thanks for other advises except noise removal.As I had a horrible time with it.I will definitely try out your idea.And thanks everyone for all those lovely advises and help. :)[DOUBLEPOST=1426541513,1426541297][/DOUBLEPOST]
I always record my voice in a closed room, inside a Blanket, that's why my videos got awesome audio quality :p
Hahaha.Nice tip! :D
 
I never personally had luck with noise removal, it always makes my voice sound horrible. I would say to either try to move to the other side of your house for recording or do what JohnKen said, the try noise removal as a last resort :).

You're probably way over doing the noise removal. You should not reduce the noise down to nothing. Look at the waveform of the noise and try to reduce down to below -40dB. If you set the noise removal to larger dB value than the noise, then your going to remove some of the wanted part of the signal. More than likely, the frequencies of your voice will overlap with some of the noise.

Don't blindly follow the noise guide that is pinned to this forum.
 
You're probably way over doing the noise removal. You should not reduce the noise down to nothing. Look at the waveform of the noise and try to reduce down to below -40dB. If you set the noise removal to larger dB value than the noise, then your going to remove some of the wanted part of the signal. More than likely, the frequencies of your voice will overlap with some of the noise.

Don't blindly follow the noise guide that is pinned to this forum.

I didn't have the need to use noise cancellation for ages but I remember that I tried all sorts of settings back when I needed it and almost everything sounded horrible. I will keep your suggestion in mind if I ever do need to use it again though :D.
 
Back
Top